Built-in Gas frying plate HOKKAIDO
Hard chrome-plated fluted steel frying plate fully welded, 15 mm thick, rear exhaust chimney.
Rinse at the front with grease drain right. A GN container or drawer for grease collection is not included and must be individually planned by the customer for the respective installation environment.
Tube group burner with thermoelectric ignition protection and ignition burner (pilot flame).
Electric ignition (standard, requires 230 V power connection) with pushbutton (for integration into the control panel) and connection box.
If no power connection is available, we offer a manual piezo ignition as an alternative.
Each heating zone is equipped with a temperature controlled gas valve (gas thermostat). A plate temperature between approx. 120 and 320° C can be selected via the control gags (levels 1 to 8).
Delivery including mounting frame. Sufficient insulating tape for heat decoupling between the device and the mounting frame is also included.
When planning the installation environment or adjacent devices, it should be noted that during normal operation, the thermal radiation at the underside of the device may still exceed 80° C.
Basic equipment (please specify deviations):
- Position of the gas connection at the gallery tube:
left – adjusted for use with 20 mbar NATURAL GAS
| Unit Depth | 650 mm |
|---|---|
| Power per Zone | 4,5 kW |
| Total Unit Power | 18,0 kW |
| Unit length | 1430 mm |
| # Zones/Burners | 4 |
| Unit Type | Built-In |
| Unit height | 300 mm |
| Model | Grooved plate |
| Energy Type | Gas |
| Electrical Connection | CEE 7/7 230V~ |
| Grill surface / Heating surface | 1330 x 475 mm |
| Gas Connection [Inch] | G 3/4" |
